Raybestos Powertrain Inline Magnetic Automatic Transmission Filter 3/8 was suppressed
Raybestos Powertrain Inline Magnetic Automatic Transmission Filter 3/8 was suppressed
Raybestos 9909301F - Lower unexpended warranty from new transmission and power steering. Improved transmission performance and durability. Improved fluid quality. Economical cost improvement. Note: item includes filter only. Because the filter is positioned in the cooler return line, all contaminated fluid must flow within the full effective range of the powerful magnet removing 99% of hard wearing ferrous metal particles, from sub-micron level and above.
The filter's safety bypass/pressure relief valve ensures consistent fluid flow under all operating conditions. Secondary filtration on non-ferrous dirt, clutch fibres, aluminum and brass is filtered out by 25 micron pleated paper membrane. The unique design of the magnet, at the entry point, allows metal particle removal even in by-pass mode.
Raybestos Powertrain Inline Magnetic Automatic Transmission Filter 3/8 was suppressed - The perforated steel core prevents membrane collapse and allows for high-pressure surges that can occur under normal operating conditions. Hose and/or hose clamps are not included. Filtration begins by the placement of a powerful magnet at the fluid entry point. With dual filtration - Patented Technology. The unique design and patented process makes this Magnetic filter the most effective magnetic in-line filter available.
Hayden Automotive 106 Transmission Oil Cooler Hose
Hayden Automotive 106 - Size is 8 inch x 4-1/2 feet. Designed for transmission fluid applications. Hayden's high quality cooler hose is a double cross braided design that maintains shape and form under pressure. Made for tight radius applications found in transmission cooler installations. It is a black long rubber transmission cooler hose.
Hayden Automotive 678 Rapid-Cool Plate and Fin Transmission Cooler
Hayden Automotive 678 - Pre-drilled mounting brackets for easy installation. Size is 3/4 inch x 11 inch x 9-1/2 inch. Gvwr up to 24, 000 pounds, towing up to 5, 000 pounds. Patented internal turbulation increases heat transfer with minimal pressure drop. Pick-up trucks and vans, class "C" motor homes, travel trailers to 24 feet. Kits contain cooler, hose and mounting hardware.
Coolers are a compact plate and fin design. Premium style transmission cooler kit.
5/8" Dia - AAS 3/8" Fuel Injection Hose Clamps FI8 Pack of 10 9/16"
Cambridge HCM-8F - 9/16" to 5/8" Diameter. Designed for use on 3/8" ID Fuel Injection Hose. 10 pcs of fuel injection hose clamps. Designed for use on 3/8" fuel injection hose. 10 pcs of fuel Injection Hose Clamps.
B&M 70264 SuperCooler Automatic Transmission Cooler
B&M 70264 - Controlled by viscosity, thicker atf is returned directly to lube through two bypass openings in the stacked plate core, while thinner ATF is directed through the core to cool as operating temperatures increase. Rigid stacked-plate design is resistant to damage, and much better at cooling than ordinary 'fin and tube' coolers.
Backed by the manufacturer with a 1 year limited warranty. The unit monitors resistance to flow by allowing a controlled amount of ATF to pass through a self-regulating orifice. Adding this b&m supercooler keeps the ATF and transmission cooler, and keeping a vehicle's transmission cool is essential for dependability, especially in performance applications.
Raybestos Powertrain Inline Magnetic Automatic Transmission Filter 3/8 was suppressed - 11" x 5-3/4" x 1-1/2" model is rated at 14, 400 BTU, and pressure tested to 200 PSI. Constructed from black finished lightweight aluminum alloy for maximum corrosion resistance. Using fluxless, oven brazed construction for vibration resistance, it is built out of lightweight aluminum alloy and features a revolutionary 'stacked plate' design with multiple oil flow paths.
The unit is designed to be very efficient for its size and weight, to cool much better than an ordinary 'fin and tube' cooler, and to reduce the risk of lube system failure. Includes installation kit.
Derale 13016 Transmission/Engine Oil Hose
Derale 13016 - 3/8 inch id x 5 feet length. High temperature, high pressure OEM spec hose. Transmission or engine oil hose. Derale's high temperature, high pressure OE-spec transmission or engine oil hose has an inside diameter of 3/8 inch and comes in pre-cut length of 5 feet.
Lubegard 19001 Dr. Tranny Kooler Kleen Trasmission Line Flush, 13.25 oz.
Lubegard 19001 - Spray over dirty depowered 6-12 volt electrical components. For best results use the entire content of can per installation. Tranny kooler kleen flush cleaner with Universal Tip is used, repackaged and designated by multiple car manufacturers and the largest transmission rebuilders. Special shipping Information: This item cannot be returned and has additional shipping restrictions.
Kooler kleen is re-packaged for auto makers. Lubegard kooler kleen ensures the new ATF stays free of water and that the transmission is installed to last. Lubegard kooler Kleen is a three-in-one product. Removes grease, dirt, sludge, grime and metal shavings. Will not harm seals or degrade new automatic transmission fluid.
Raybestos Powertrain Inline Magnetic Automatic Transmission Filter 3/8 was suppressed - This is because it is the only mineral based transmission line flush. For use as a line flush cleaner: simply attach the connector to the transmission feed line; next, attach the hose to a transmission return line to collect flush and residue in a waste container; hold the can upright and actuate; flush until clear.
Caustic water-based flushes leave behind a film of detergents and dispersants, water and soapy residue that will become part of the new ATF when the transmission is re-installed which can cause shudder and damage to clutch plates. For a dielectric protectant: allow cleaned components to dry before repowering.
Will not leave behind water or soapy residue to contaminate the transmission.
1 Quart Pack of 12 - Mobil 1 55221 3309 Automatic Transmission Fluid
Mobil 1 55221-12PK - Please refer to the owner's manual for proper fluid requirements. Controlled friction properties for smooth and efficient transmission of power across all normal temperature ranges. Long fluid life based on excellent oxidation resistance. Helps to extend transmission life based on excellent wear control. Some manufacturer's recommend more frequent changes of transmission fluid under severe driving conditions, such as heavy traffic, hot weather and trailer pulling.
Automatic transmissions should be checked for proper fluid levels at regular intervals, and the fluid should be changed at manufacturer recommended intervals. The unique formulation of mobil ATF 3309 is designed to provide excellent lubrication of transmission in specified slip-controlled lock-up automatic transmissions.
Raybestos Powertrain Inline Magnetic Automatic Transmission Filter 3/8 was suppressed - It is also recommended for service fill applications where Toyota T-IV or T4, T-III or T3 are called for. Helps to control transmission shudder and provide excellent vehicle drivability. However, this may vary due to your vehicle's operating condition. Excellent lubricating characteristics for quiet operation and smooth shifting in approved transmissions.
Mobil atf 3309 is recommended for use in transmissions requiring fluids of JWS 3309 or GM 9986195 quality levels. Mobil atf 3309 is an exceptionally high performance lubricant that meets original equipment manufacturer's specifications for use in certain slip-controlled lock-up automatic transmissions. These outstanding performance capabilities translate into significant operational benefits, helps to control transmission shudder and provide excellent vehicle drivability, long fluid life based on excellent oxidation resistance, resistance to foaming, excellent viscosity stability high viscosity index to help assure adequate lubrication without excessive thinning in severe high-temperature service or thickening at low starting temperatures, super protection against rusting and corrosion, including: Excellent lubricating characteristics for quiet operation and smooth shifting in approved transmissions, controlled friction properties for smooth and efficient transmission of power across all normal temperature ranges, helps to extend transmission life based on excellent wear control, compatibility with synthetic rubber seal materials.
Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz.
Lubegard 60902 - Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit - Optimizes total transmission performance. Directions for use: For normal applications, add 1 oz. The use of lubegard atf protectant will not cause clutch friction upset or slippage. Lubegard is designed to raise the thermal and oxidative stability level of automatic transmission fluids, it does not thin out and pyrolize, so when it operates at elevated temperatures, burn or react with oxygen and form deposits.
Eliminates clutch chatter and torque converter shudder; Softens and modifies harsh shifts making them quicker in duration. 29. 6 ml per quart liter of aTF to the total transmission capacity including torque converter with motor idling in park. It contains lxe liquid Wax Ester Technology and their derivatives, base oils and conventional additives.
Raybestos Powertrain Inline Magnetic Automatic Transmission Filter 3/8 was suppressed - Lubegard automatic transmission fluid atf protectant is for use in all automatic transmissions and manuals requiring an ATF, including heavy duty transmissions, such as Allison. Eliminates transmission fluid foaming and oxidation and reduces wear throughout the transmission. Do not overfill. Only protectant that increases the fluid's ability to transfer heat / Protects new seals and permanently restores older seals to a like-new condition, without adverse side effects.
Lubegard controls heat and is especially effective in today’s hotter running front wheel drive vehicles.
Motorcraft FD4596 Fuel Filter
Motorcraft FD4596 - 12 months warranty. This fuel filter removes 90% of particles. This fuel filter facilitates hassle free installation and is backed by a 12 month warranty. It has brazed connector and support washers for enhanced durability and strength. It is provided in a stainless steel case for corrosion resistance. Provides enhanced strength and durability.
Motorcraft fuel filter is designed to withstand six times the normal operating pressure of the fuel system. Delivers 90% efficiency. Corrosion resistant. Easy to install.
Dana Corporation, Long Manufacturing
Long Tru-Cool LPD Transmission Oil Cooler 4454 18,000 GVW
Dana Corporation, Long Manufacturing 4454 - Fitting size is 11/32 hose barb. This cooler is rated at 18, 000 GVW and measures 7. 25"x11"x. 75". This cooler comes with a manufacturer's limited lifetime warranty. This is a "low pressure drop" unit that is 15 times less restrictive then other brands. 18, 000 gvw. If you want to extend the life of your transmission and avoid or prolong a costly rebuild, this is very cheap insurance.
This is a must for heavy duty applications, from towing to racing, but is recommended for even daily driven vehicles. All parts are included to mount and plumb this cooler. These may be a little more expensive then some brands, out cool any other cooler on the market, but they by far, plus are made to OEM specs.
Raybestos Powertrain Inline Magnetic Automatic Transmission Filter 3/8 was suppressed - Stacked plate. It also delivers 30% better cooling then other brands rated at the same GVW. Performance-rated for cars, vans and light trucks up to 28, 000 lbs. Low pressure drop. Heat is what kills an automatic transmission. Protection against #1 cause of transmission failure. 7 1/4.