iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours

1
iSpring
iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours
iSpring UVB11 - Replacement uv light bulb - Philips Brand- 11W for UV filters. Kills 99% of all bacteria and virus. Approximate dimension: dia 5/8" x 8 1/4" L not including the poles. Flow rate: 1gpm; last 8, 000 hours. 11w uv lamp made in Poland. Great for place where bacteria or virus is a concern for drinking water. Uv lamp is recommended to be replaced every 12-month to ensure its function.
11w germicidal uv lamp, Philip Brand, Fits #UVF11. Specifications & dimensions: 11 watts approximate dimension: Dia 5/8" x 8 1/4" L not including the poles System Package Weight : 1 lbs.
More details
2
Ispring Water Systems LLC.
iSpring UVF11A UV Disinfection Sterilizer Water Filter with Smart Flow Sensor Switch, 1-GPM 11-watt 110-volt
Ispring Water Systems LLC. UVF11A - Complete add-on kit, can be added to most RO systems as a final stage to the system. Smart flow sensor Switch powers on/off UV light automatically by water flow. Please google ispring filter for more info. The package includes everything you need to add to your current water filter system. Flow rate: 1gpm; last 8, 000 hours.
Stainless steel housing - 11w germicidal uv lamp, phillips brand - quartz sleeve - rubber o-ring - Electronic ballast with Smart Flow Sensor Switch AC110V/60Hz - 2 Elbow fittings and nut - 2 brackets to hang the filter on the wall - Instruction We also carry many other home filter systems. 11w uv lamp in stainless steel chamber, Philips lamp is made in Poland.
More details
Similar products
3
iSpring
iSpring FA15 10-in inline 2-Layer Alkaline Replacement Filter Cartridge with Calcite & Mineral balls
iSpring FA15 - Makes the water cleaner and healthier. Capable of increasing the PH value of the RO water by 05 to 08, which helps minimize the fluctuations of your body's pH. The minerals from the alkaline filter are natural calcium, sodium, potassium ions, magnesium, which can be absorbed 100% by the body. The alkaline filter improves the PH value of the RO water which could be lightly acid after the reverse osmosis process.
Improves the qualities of clean water by adding necessary minerals for proper human development and health, Sodium, Magnesium, such as Calcium, Potassium and others readily found in many natural mineral waters. Mainly installed with ro systems to complement their absolute filtration qualities - Filter life: 1500 Gallons Product Highlights Fits most RO systems, including those brand name models.
iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours - Can be added to any undersink water filter or RO system. Product features alkaline PH filter for Reverse Osmosis system is an inline cartridge with mineralized ball & calcite media. These ions are structurally smaller molecules which help the body take in more water and replenish quickly lost water. It also gives back healthy minerals such as ionized calcium, magnesium, potassium ion, sodium, which were taken away while purifying the water.
Raises ph by 05- 0
More details
Similar products
4
iSpring
iSpring MC7 1.8-Inch x 12-Inch 75GPD Reverse Osmosis Membrane
iSpring MC7 - Spiral wound design for superior membrane flux with high active membrane surface area. Specifications & dimensions - capacity: 75 gallons per day @ 50/60 psi & 77 degree F - Feed water pressure: 40 - 100 PSI - Feed water Temperature: 40 - 100F - Max. Hardness: 10 gpg - Max. Iron 02ppm - ph limits: 4 - 10 - Length: 10", O.
D. Total dissolved solids TDS: 2000 ppm - Max. Industry standard size that fits most RO systems. Rejects wide spectrum of impurities down to. 0001 micron. 1. 8" - 1/4" fitting - Weight: 08 lbs 75gpd reverse osmosis membrane, tested by independent third-party to meet NSF/ANSI Standard. Tfc thin film Composite high quality membrane.
More details
Similar products
5
iSpring
iSpring 123Filter UVT11A - 11-Watts 110-Volt Transformer Ballast with Smart Flow Sensor Switch
iSpring UVT11A - The model# of the complete UV filter is iSpring UVF11A. It requires aC110V/60Hz. The kit includes only the Electronic ballast with Smart Flow Sensor Switch. 1/4" quick fitting, 11 watts, 1 gpm, 110v AC 220v model UVT11B.30 day money back and 1 year manufacturer warranty. The included smart flow Sensor Switch turns on and off UV light automatically by water flow.
It does not include the UV light and housing. Save energy, reduce heat hazard, extend UV bulb life. It works with 11W UV lamp. Includes transformer and Flow Sensor Switch. Smart flow sensor Switch automatically powers on/off UV light by water flow. Complete upgrade Kit, can replace older UV transformer that stays on.
iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours - The kit is part of ispring uvf11a but can also be used to add Smart Flow Sensor to other 11w UV filters. Resolves the issue that water gets heat up by UV light. Extends UV lamp life. Smart flow sensor Switch powers on/off automatically by water flow.
More details
Similar products
6
iSpring Water Systems
iSpring FT15 5th Stage Inline Post Carbon Filter Replacement Cartridge
iSpring Water Systems FT15 - Our aim is to make high quality drinking water accessible for all households. 2. 5" 1/4" fitting Weight: 07 lbs why ispring? located in alpharetta, georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. It can also be used for refrigerators, ice makers, coffee machines, water coolers and more.
Removes chlorine, tastes, and odors to improve the quality of your drinking water. Individually wrapped to preserve freshness. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.1/4" connections. Depending on your water usage and quality, it should be replaced about every 12 months.
iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours - Our products include residential and commercial reverse osmosis RO systems, filter cartridges and housings, RO coolers, shower, ultrafiltration systems, faucet, and counter top filters, whole house water systems, and kitchen faucets and fittings. Fits models rcc7 rcc7p rcc7ak rcc7ak-uv rcc7d rcc7u rcc1up rcb4t rcs5t rcb3p specifications & Dimensions Length = 10", O.
D. High-quality 10" x 2" Post Carbon Filter replacement cartridge. Used as the 5th stage on ispring rO systems.
More details
Similar products
7
iSpring
iSpring F7-GAC 1-Year Filter Replacement Supply Set For 5-Stage Reverse Osmosis Water Filtration Systems
iSpring 7PK-GAC - Replace approximately every 12 months. Note: the 1-year filter supply does not come with an RO membrane, as the membrane only need to be changed every 2-3 years. Replace approximately every 6 months. 2x 5 micron 10" cto carbon block filters 3rd Stage, #FC15: Further removes any remaining chlorine, tastes, and odors.
Replace approximately every 6 months. 2x 5 micron 10" granular activated carbon gac filters 2nd Stage, organic contaminants, odors, #FG15: Absorbs chlorine, halide, and other impurities that contribute to bad tastes and odors.2x 5 micron 10" sediment filters 1st Stage, #FP15: Removes dirt, rust, sand, and other particles.
iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours - The f7-gac 1-year filter pack comes with a total of 7 replacement filters so the filters can be changed on schedule for 1 year. Tested by independent third-party to meet NSF/ANSI Standard, high capacity replacement filters for 5-stage reverse osmosis systems. Replace approximately every 6 months. 1x post carbon inline filter 5th stage, #FT15: Polishes the water from the tank before it is delivered to the faucet.
Standard sized 10" x 2. 5". Fits ispring rcc7, and most other rO systems that use standard sized filter housings including Flowmatic, rcc7P, crystal quest, puroline, and Apec.
More details
Similar products
8
HM Digital, Inc.
HM Digital DM-1 In-Line Dual TDS Monitor, 0-9990 ppm Range, +/- 2% Readout Accuracy
HM Digital, Inc. DM-1 - Product description: how pure is your water? hM Digital's DM-1 is a dual inline monitor that measures TDS from 0 to 9990 ppm. The unit shuts off automatically after 10 minutes of non-use. Installs quickly and easily. The dm-1 is an easy and convenient method of determining TDS levels for water filtration/purification systems such as reverse osmosis RO, deionization DI and more.
Auto-off function conserves battery power. It includes batteries, two sensors and two 1/4" quick-connect T-fittings. It's very useful for coolers or under-the-sink systems. The in-line dual tds meter displays TDS levels of the feed water and product water with in and out electrode probes. The dm-1 helps you to measure the tap water coming in vs the purified water going out of your water filtration system at any time.
iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours - This tds monitor is highly efficient and accurate due to its advanced microprocessor technology. For any type of system that removes tds, you can install the 'IN' sensor on your tap water before the system and the 'OUT' sensor on your product water after your filtration system to determine the filter/membrane's effective operating rejection rate.
Highly efficient and accurate due to its advanced microprocessor technology.
More details
Similar products
9
iSpring
iSpring UVF11B-A 1-GPM 11-watt 220V UV Disinfection Sterilizer System
iSpring UVF11B-A - 220v 11w uv lamp in stainless steel chamber. Kills 99% of all bacteria and virus! The package includes everything you need to add to your current water filter system. Flow rate: 1gpm; last 8, 000 hours. Built-in flow sensor switch. Stainless steel housing - 11w germicidal uv lamp, phillips brand - quartz sleeve - Rubber O-ring - Electronic ballast AC220V/50-60Hz - 2 Elbow fittings and nut - 2 brackets to hang the filter on the wall - Instruction.
Complete add-on kit, can be added to most RO systems as a final stage to the system.
More details
Similar products
10
iSpring
ICEK - iSpring Fridge Connection and Ice Maker Kit for Reverse Osmosis Water Systems, 20ft 1/4" Tubing with 1/4" Push-In and Compression Fittings
iSpring ICEK - The kit comes with a 1/4" x 1/4" x 1/4" "t" valve to branch off from the ro system, 20 feet of 1/4" tubing, a 1/4" x 1/4" ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The ispring fridge connection kit connects your reverse osmosis system to an additional dispensing location.
Connects any RO system to an additional dispension location. It can be used to supply your refrigerator's ice maker or water dispenser, your coffee maker, etc. Assists in delivering crystal clear ice cubes and great tasting RO water to your fridge. Kit includes 20 feet 1/4" tubing, an inline 1/4" x 1/4" shut off valve, and a compression fitting set, a 1/4" x 1/4" x 1/4" "T" valve, tested by independent third-party to meet NSF/ANSI Standard.
iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours - Compatible with reverse osmosis systems and water filter systems with standard 1/4" tubing. Push-in quick connect fittings offer easy DIY installation with no tools required. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4" tubing.
More details
Similar products
11
iSpring
EU Style High-Spout, Brushed Nickel - iSpring GA1-BN 6.5"x11" 14oz Solid Brass Heavy Duty Water Filter Designer Faucet
iSpring GA1-BN - 360 degree free swivel. Ideal upgrade for undercounter water filters and reverse osmosis systems. An elegant lead-free european style water filter faucet or Reverse Osmosis system faucet will add a great accent to your kitchen. A 1/2-inch hole is all that is needed for the faucet stud all series, but a cover plate is included to accommodate larger pre-drilled holes.
European designer Lead-Free faucet. Non "air Gap" Faucet. For 1/4-Inch tubing. It is 11-inch tall and has a swivel spout with a reach of 6. 25-inch. Brushed nickel; may come with Quick Fitting or Jaco Fitting. Note: not to be used with RO systems that require an Air gap faucet which has three connections on bottom of faucet.
iSpring UVB11 Replacement Lamp / Light Bulb for Water Filter UV Disinfection, 11 watts; 1-GPM; 5/8" x 8 1/4"; Last 8,000 hours - It features a smooth quarter turn handle with a ceramic seat for a lifetime of service.
More details
Similar products